_______________________________ Infection Control for Dental Professionals: The California Requirement
Gloves DHCP should wear medical exam gloves to prevent contami- nation of their hands when touching mucous membranes, blood, saliva, or OPIM [9]. Gloves reduce the likelihood that micro-organisms present on the hands will be transmitted to patients during surgical or other patient-care procedures. Gloves used in the healthcare setting are subject to U.S. Food and Drug Administration (FDA) evaluation and clearance. Nonsterile, disposable medical gloves made of latex or nitrile should be available for routine patient care. Dental personnel should always use gloves when [18]: • Anticipating direct contact with blood or bodily fluids, mucous membranes, nonintact skin, and OPIM • Engaging in direct contact with patients who are colonized or infected with pathogens transmitted by the contact route, such as vancomycin-resistant enterococci or methicillin-resistant Staphylococcus aureus (MRSA) • Handling or touching visibly or potentially contaminated patient care equipment and environmental surfaces Studies have repeatedly shown that vinyl gloves have higher failure rates than latex or nitrile gloves. For this reason, either latex or nitrile gloves are preferable for clinical procedures that require manual dexterity or those involving more than brief patient contact. Heavier, reusable utility gloves should be used for non-patient-care activities, such as handling or cleaning contaminated equipment or surfaces, handling chemicals, or disinfecting contaminated tools [9; 18]. During dental procedures, patient examination gloves com- monly contact multiple types of chemicals and materials, such as disinfectants and antiseptics, composite resins, and bonding agents, and these materials can compromise the integrity of latex, nitrile, and other synthetic glove materials. In addition, latex gloves can interfere with the setting of vinyl polysiloxane impression materials. Given the diverse selection of dental materials on the market, dental practitioners should consult glove manufacturers regarding the chemical compatibility of glove materials [5; 18]. Wearing sterile surgeon’s gloves during surgical procedures has a strong theoretical rationale. Sterile gloves minimize transmis- sion of micro-organisms from the hands of surgical personnel to patients and prevent contamination of the hands of surgical personnel with the patient’s blood and bodily fluids. In addi- tion, sterile surgeon’s gloves are more rigorously regulated by the FDA and may provide an increased level of protection for the provider if exposure to blood is likely [10; 18]. Gloves should be removed and replaced if torn or punctured and discarded between patients to prevent transmission of infectious material. They should never be washed and reused, as micro-organisms cannot be removed reliably from glove surfaces. Glove reuse has been associated with transmission of MRSA and gram-negative bacilli [9; 10].
from healthcare workers hands both pre- and postprocedure. In addition, antiseptics may be added to alcohol-based handrubs in order to achieve persistent germicidal activity. Possible side effects associated with frequent use of antiseptic hand scrubs include skin irritation, dermatitis, allergic reactions, and potential development of microbial resistances. Chlorhexidine products are considered safe for regular use in dental practice; however, if associated side effects are bothersome, they may result in decreased hand hygiene compliance [10; 14]. In summary, start and end each work day using an antibacterial soap. Gloves provide a breeding ground for microbial growth, and washing before and after use is encouraged. If hands are not visibly soiled, a waterless hand sanitizer (at least 60% alco- hol) may be used. For surgical procedures, wash hands with antimicrobial soap prior to gowning and gloving [5]. PERSONAL PROTECTIVE EQUIPMENT PPE is defined as special coverings designed to protect health- care personnel from exposure to or contact with infectious agents [18]. Cal/OSHA regulations require use of PPE in dental care settings to protect personnel from exposure to bloodborne pathogens and other OPIM [9]. Under OSHA’s General Duty Clause, PPE is also required for any potential infectious dis- ease exposure. Employers must provide their employees with appropriate PPE and ensure its proper disposal. If reusable, it must be properly cleaned or laundered, repaired, and stored after use [19]. PPE must fit the individual user, and it is up to the employer to ensure that PPE is available in sizes appropri- ate for all their workers. Employees are prohibited from taking PPE home to launder. In addition to the familiar gloves, masks, and gowns, PPE includes a variety of barriers and respirators used alone or in combination to protect skin, mucous membranes, and airways from contact with infectious agents. The selection of PPE is based on the nature of the patient/provider interaction and the likely mode of transmission. Primary PPE used in oral healthcare settings includes gloves, surgical masks, respiratory devices, protective eyewear, face shields, and protective shoes and clothing. Procedures that can generate splashes or sprays of blood, bodily fluids, secretions, excretions, or chemical agents require either a face shield (disposable or reusable) or mask and goggles. The wearing of masks, eye protection, and face shields in specified circumstances (when blood or OPIM exposures are likely to occur) is mandated by the OSHA Bloodborne Pathogens Standard. Sterile barriers for invasive procedures and masks or respirators for the prevention of droplet contamination are also required [2]. The use of PPE is not a substitute for safe work practices. Avoid contaminating yourself by keeping your hands away from your face and not touching or adjusting equipment. PPE is a poten- tial means of transmission if not changed between patients. All PPE should be removed when leaving patient care areas.
37
EliteLearning.com/Dental
Powered by FlippingBook